Skip to Content
Coastal Marine Electronics
Coastal Marine Electronics
Home
Shop
Insights & Ideas
Services
About
Contact
(0)
Cart (0)
Coastal Marine Electronics
Coastal Marine Electronics
Home
Shop
Insights & Ideas
Services
About
Contact
(0)
Cart (0)
Home
Shop
Insights & Ideas
Services
About
Contact
Shop Garmin SS60 12deg Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-Pin
65535.gif Image 1 of
65535.gif
65535.gif

Garmin SS60 12deg Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-Pin

$429.99

SS60 12deg Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-Pin

his stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45/12 degrees; and an 8 to 15 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

When using with a 6-pin Garmin sounder, a transducer adapter cable is required.

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Add To Cart

SS60 12deg Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-Pin

his stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45/12 degrees; and an 8 to 15 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

When using with a 6-pin Garmin sounder, a transducer adapter cable is required.

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SS60 12deg Tilt Thru-Hull 600W, 50/200kHz Transducer - 8-Pin

his stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45/12 degrees; and an 8 to 15 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

When using with a 6-pin Garmin sounder, a transducer adapter cable is required.

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Coastal Marine Electronics

Location

134 Crowder Point Dr

Reedville, VA 22539

Contact

Email Us
or Call (804) 453-0009